How to shape a bath pouf?

The bath pouf is relatively easy to disperse. The method of tie-up is to flatten it first, and then directly use a rope to pass through the inner layer of the net surface without folding, and directly tie it with a rope. Simply attaching only 2 dead buttons is not enough, you have to attach one each to each side, and finally tighten it. If the rope itself is loose, you can change to a cotton rope. For example, shoelaces can be used as cotton rope.

Use a needle to pierce a thread of about the same length, preferably a few more strands, for example 4 strands. Then sew the bath pouf from the middle according to the folding method. At the beginning, tie a few more dead buckles in the gap hole in the middle to avoid loosening, and then fold the scattered place back and forth, the width is almost the same as the original one. After sewing the scattered places, finally fold back and sew to the original beginning. It is enough to fasten it, and then find the original rope and wear it. I made all the balls of our family again. It's the same as before, never going away again.

Fold this long piece of yours like a folded paper fan. Each fold is about 7-10 cm. After folding, tie a strong rope in the middle.

Look for a relatively loose place at both ends, pinch two points, and tie the other with a thin string.

The second rope and the first rope should go around each other a few times. Remember to make a few laps under the first rope. Tie tightly.

Then loosen the net-shaped part of the bath pouf to make the whole into a ball.

bath pouf products web:https://www.teng-jie.com/body-puff-pl3486713.html